Addition Cure Silicone Liquid Rubber Translucent Moulding Silicone Ratio 1 To 1
| Item No. | MCPLA-L25A/B |
| Appearance | Viscous liquid |
| Color | Translucent |
| Viscosity ( cps,approx.) | 7000-9000 |
| Mix ratio (A:B) | 100:100 |
| Working time(at 25℃ ,minutes) | 30~40 |
| Curing time(at 25℃,hrs,approx.) | 4~6 |
| Hardness Shore A(after 24 h) | 25 |
| Tensile Strength(Mpa,after 24 h) | 4.2 |
| Elongation(%) | 550 |
| Tear Strength(N/mm) | 17 |
| Linear Shrinkage (%) | 0.1 |
RTV2 Translucent Platinum Cured Liquid Silicone Rubber Epoxy Resin Mold Making
MCPLA-L25A/B RTV2 platinum cured liquid silicone rubber is a two-part, high-performance elastomer that is used for mold making, casting, and other industrial applications. It is called "platinum cured" because it uses a platinum catalyst to initiate the curing process, which results in a higher quality and more durable end product.
Applications of Platinum Cured Liquid Silicone Rubber Epoxy Resin Mold Making
Molding applications requiring low shrinkage.
Food grade molds for cake, chocolate, candy, fondant,
and other resin crafts, plaster, cement art decorations, etc
Features of RTV2 Translucent Platinum Cured Liquid Silicone Rubber
#High Strength: RTV2 platinum cure silicone rubber has a high tear strength, making it ideal for making complex molds that require multiple demolding times.
#Bubble Free : Due to the low viscosity of MCPLA-L20A/B platinum silicone and long working time , the silicone could release the bubble itself.
#High Temperature Resistant: MCPLA-L20A/B is suitable for casting resin crafts with Temperature Resistant property.
#Food Safe, Skin Safe, Eco-Friendly
Processing and Instructions of Addition Cured Liquid Silicones Rubber
Step 1
The ideal working temperature is around a constant 25°C. Best results can be obtained at constant temperatures between 21°C and 26°C, in a clean, dry, dust-free environment. Avoid working in high humidity.
Step 2
Measure product in accordance with your intended use. Prepare 1 part A to 1 part B by weight and pour into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing.
Step 3
The material must be mixed thoroughly for at least 5 minutes. make sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture.
Step 4
Prepare a container(not silicone material),add the item and keep them face up.
Pour the mixed silicone onto the container and distribute evenly to cover the top of the item by at least 6-7mm
Step 5
Adjust the position and then let it cure, the bubbles will melt gradually.
Step 6
Pull the item out of the mold
Note: Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.
Storage and shelf life
MC Silicone MCPLA -L Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification.
Packaging of Addition Cured Liquid Silicones Rubber
20kg/drum: 24 drums (480kg) or 32 drums(640kg) per pallet
200kg/drum or 220kg/drum: 4 drums per pallet
MINGCHENG GROUP LIMITED with brand MC Silicone,established in 2011, is a professional manufacturer of silicone mould making and casting materials based in Dongguan, China.
Our professional approach to all our work, together with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials.
Our products include:
1.Condensation cure silicones for making molds for gypsum, concrete and resin arts and crafts, candle soap and shoe mold,
2.Addition cure silicones for making molds for jewelry, rapid prototype, food grade silicone for chocolates and cakes,life casting silicone.
3.Addition cure silicone putty for equine hoof cushion making, resin crafts mold making.
4.silicone potting compound for electronics encapsulating.
Product Tags:
|
|
Addition Cure Silicone Liquid Rubber Translucent Moulding Silicone Ratio 1 To 1 Images
|
